Daewoo DWD-FD1451 Service Manual page 11

3) Remove the nut using the 10mm hex wrench and
remove the earth terminal from the HEATER.
BLDC MOTOR
1) Remove the nut using the 17mm hex wrench.
3) Remove six screws using the 10mm hex wrench and
connectors from the STATOR.
4) Loose the nut of the HEATER and pull out the
HEATER.
2) Pull out the ROTOR.
4) Separate the STATOR from the TUB.
DIRECTION FOR DISASSEMBLY 17