To Hoop The Fabric; Built-In Designs; Royale ™; Classic Collection - Husqvarna Viking Viking Royale User Manual

TO HOOP THE FABRIC

beneath the fabric. When hooping stabilizer and fabric
make sure that they are smooth and securely hooped.
the lower right. There is a small arrow in the center of
the lower edge of the hoop which will line up with a
small arrow on the inner hoop.
2. Place the stabilizer and fabric, with the right sides
facing up, on top of the outer hoop. Place the inner
hoop on top of the fabric with the small arrow at the
bottom edge.
fabric should be taut in the hoop for the best results.
Note: When embroidering additional designs on the same fabric, open
the quick release, move the hoop to the new position on the fabric and
close the quick release. When changing type of fabric, you might need
to adjust the pressure using the retaining screw. Do not force the quick
release.

BUILT-IN DESIGNS

Over 180 designs are included in the memory in your
Royale
™
DESIGNER RUBY Royale
book for designs and fonts.
design. The suggested thread color for each color block is
shown.

CLASSIC COLLECTION

The Classic Collection designs are available for you to
Designer Ruby Royale/Updates and Downloads. Click on
When unzipping you will be asked for a password. Enter
and ready to use.
6:4
SAMPLER BOOK
™
Royale ™
® website. Go
C
B