Advertisement
Fortin EVO-ONE Programming (cont'd):
2. Turn the Ignition to the ON position, do not start the vehicle. Press and hold the programming button until the
Red LED flashes in the opening where the yellow wires come out. None of the LED's on top of the module
should be flashing.
3. Release the programming button.
4. Press and release the programming button (5) times.
5. Press and release the brake pedal once.
6. Press the Start button on the REVO-1 or the Lock button on the REVO-4, you may have to hold the button for up
to 3 seconds. The Red LED will flash (1) time to confirm that the remote has codded. Repeat this
step for each remote you want coded. You can have up to (4) remotes at a time.
7. Turn OFF the ignition to exit programming.
TRANSMITTER PROGRAMMING
8
Advertisement
