Ftp - D-Link DCS-960L User Manual

Section 4: Configuration
This section allows you to configure your camera to send snapshots and video clips to an FTP server. After making any changes, click Save Settings.
Host Name: Enter the IP address of the FTP server that you will be connecting to.
Port: Enter the port number of the FTP server that you will be connecting to.
User Name: Enter the User Name for your FTP server account.
Password: Enter the Password for your FTP server account.
Path: Enter the destination path/folder to save files to on the FTP server.
Interval: Enter the interval in seconds (30 - 86400).
Passive Mode: Click Yes to enable the passive mode. This may help you reach your FTP
server if your camera is behind a router protected by a firewall.
Click Test to send a test JPEG snapshot to the FTP server specified above,
Test FTP Server:
and to make sure that your settings are correct.
Click Save Settings to save your changes.
D-Link DCS-960L User Manual

FTP

36