D-Link DCS-960L User Manual page 26

Section 4: Configuration
HTTP Port:
The default port number is 80.
RTSP Port:
The port number that you use for RTSP streaming to mobile devices,
such as mobile phones. The default port number is 554. You may
specify the address of a particular stream. For instance, live1.sdp can
be accessed at rtsp://x.x.x.x/video1.sdp where the x.x.x.x represents
the ip address of your camera.
HTTPS Enable:
Check this box to enable HTTPS. This will create a secure connection
from your computer to the camera while using the web-based
configuration utility.
HTTPS Port:
Assign a port to HTTPS or use the default port number of 443.
UPnP:
Enabling this setting allows your camera to be configured as a UPnP
(Universal Plug and Play) device on your network.
Enable UPnP Port
Enabling this setting allows the camera to add port forwarding
Forward:
entries into the router automatically. You must have UPnP enabled
on your router.
External Ports:
Enter the external port for HTTP, HTTPS, and RTSP. These are usually
the same as the values above. Only change if the ports are being
forwarded by your router to other services.
Bonjour Enable:
Enable to allow discovery of your camera by Apple devices.
Bonjour Name:
Enter a name for the camera to be seen by Apple devices.
D-Link DCS-960L User Manual
Port Settings/UPnP
26