Ftp Settings - D-Link DCS-6220G User Manual

DCS-660G User's Manual
Configuration > Advanced > Mail & FTP (continued)
SMTP
SMTP (mail) server 1:
SMTP account name 1:
SMTP password 1:
Recipient e-mail address 1:
SMTP(mail) server 2:
SMTP account name 2:
SMTP password 2:
Recipient e-mail address 2:
Return e-mail address:

FTP Settings

Local FTP server port:
1st FTP server:
1st FTP server port:
1st FTP user name:
1st FTP password:
D-Link Systems, Inc.
Using the DCS-660G with an Internet Browser
The domain name or IP address of external mail server.
The user name used to log into your e-mail account (e.g. jdoe or jdoe@
yourisp.com depending on your ISP).
The password used to log into your e-mail account. (The password will
appear as dots instead of entered characters.)
The e-mail address of recipients for snapshots or a system log file.
Multiple recipients must be separated by a semicolon ";"
The domain name or IP address of a secondary mail server used only
if the primary mail server is unreachable.
The user name for the second SMTP server.
The password used to log into the second e-mail account. (The password
will appear as dots instead of entered characters.)
The e-mail address of recipients for the secondary server.
The return e-mail address to use if the snapshot or system log e-
mail fails to send. (This address should be within the SMTP server's
domain for authentication purposes.)
Can be other than default port 1. If you find that you want to change
the port to a port number other than 1, you will need to specify the
port when connecting to the FTP server. For example FTP://68.5.1.81:60
(if you are to use port 60 for your FTP server port)
The domain name or IP address of the external FTP server. The following
user settings must be correctly configured for remote access.
The port to access the external FTP server.
Granted user name on the external FTP server.
Granted password on the external FTP server.
4