Snapshot - D-Link DCS-960L User Manual

Section 4: Configuration
This allows you to set the camera to take snapshots when motion is detected. Snapshots can be sent to an e-mail address or to an FTP server. After
making any changes, click Save Settings.

Snapshot:

Check this box to enable.
Trigger by: Select the trigger event from the drop-down menu. Motion begins
a snapshot after a motion is detected; Schedule sends "snapshots"
at a specified time; Always provides continuous snapshots.
Only During: Check the Only During box to set a schedule for taking snapshots.
Then check the box(es) to select a day or days, and choose a starting
and ending time from the drop-down menus.
Source: Profile 2 will be the source for snapshots. Refer to "Audio and Video"
on page 30 to modify quality and resolution settings.
Snapshot Type:
Select whether to take a single snapshot or to take six snapshots
with a 1 or 2 second interval between them.
Target: Select where you want the snapshot to be sent. It may be uploaded
to an FTP server or sent to an email address.
You will need to enter your FTP or email information before selecting.
Refer to the previous two pages to enter your account settings.
D-Link DCS-960L User Manual
Snapshot
37