Table of Contents
Advertisement
R
L
R
ZONE OUT
LINE
PHONO
A2
A1
P4
FlexFX Send/Return
The MP26's FlexFX Loop includes an analog insert loop for use
with outboard effects processors. The Send and Return signals
are on stereo unbalanced ¼˝ TS jacks. The Left and Right Send
jacks provide auto-mono operation. Simply plug in one side for
mono, or both sides for stereo. The Return jack provides similar
operation. Plugging into either the left or right return jack sends
the signal to both the left and right FlexFX Loop return chan-
nels. Plugging into both jacks separates the left and right return
channels.
USB
Connect your computer to the USB port on the MP26 to send
up to twenty-two channels of audio to/from your favorite multi-
track mixing, beat-making, looping, sampling, and record-
ing software applications. Install the MP26 ASIO (Windows)
or Core Audio (Macintosh) drivers (instructions later in this
manual), so that your computer recognizes the MP26.
Digital Inputs
The MP26's USB audio interface includes five stereo playback
channels. Playback channels are audio streams from the com-
puter to the MP26. Four of these five channels are
MP26's digital program inputs. Each of the four program strips
has access to one of the four digital input channels using the
selector on the program strip. The fifth stereo playback
Source
channel is the return channel of the FlexFX USB insert loop.
L
BOOTH OUT
LINE
PHONO
P3
P2
P1
D1
-
PHONO
GROUND
LINE
MIC
PHONO
LINE
MIC 2
Digital Outputs
The MP26's USB audio interface includes six stereo record chan-
nels. Record channels are audio streams from the MP26 to the
computer. Four of these five channels are post-fader record chan-
nels from the MP26's program strips. These four record streams
may be used to multi-track record your set for post-production
editing and mix-down. The fifth USB record channel is the send
channel of the FlexFX USB insert loop. The sixth record channel
may be used to record the Main Mix (default), Mic 1, or Mic
2. Select the record source for USB record channel 6 using the
MP26 driver control panel on your computer.
MIDI
In addition to being an audio interface, the MP26 front panel is
also a USB MIDI controller. The Zone Level, Main Balance and
Main Level controls are the only front panel controls not MIDI
enabled. See MIDI Implementation later in this manual.
Power Supply
The MP26 features an internal universal switching power supply
that operates on any AC mains 100 to 240 VAC, 50 or 60 Hz
(most places in the world). All that is required when traveling
D4
, the
between different countries is the appropriate power cord, which
is usually readily available.
MP26
CLUB MIXER
MP26
RANE CORP.
MIC 1
9
Advertisement
Table of Contents
