Advertisement

OPERATORS MANUAL
MP 24
DJ MIXER
QUICK START
Don't! Quick-starting an MP 24 is like trying to quick-start a 747. It's just not something you do. Trust us, you don't
want to make mistakes with this sucker. So just this once—please—we highly recommend you read this entire manual:
front-to-back, every single page, every single word. It will familiarize you with the many intricacies of the MP 24, not to
mention all the nooks and crannies.
Manual-1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MP 24 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Rane MP 24

  • Page 1 QUICK START Don't! Quick-starting an MP 24 is like trying to quick-start a 747. It's just not something you do. Trust us, you don’t want to make mistakes with this sucker. So just this once—please—we highly recommend you read this entire manual: front-to-back, every single page, every single word.
  • Page 2: Front Panel Description

    FRONT PANEL DESCRIPTION 1. POWER “ON” indicator: This yellow LED illuminates anytime the MP 24 is connected to an appropriate power source (see #28, Rear Panel). 2. SOURCE CONTROL selectors: These four position rotary switches provide Input selection between the various Phono and Line Inputs for their respective mixing Channels.
  • Page 3 Fader Care: With heavy use in harsh environments, the faders may need lubrication. Rane recommends spraying one or two bursts of CaiLube MCL into the fader. Work the fader back and forth a few times after spraying. This treatment extends longevity and can make used faders as good as new.
  • Page 4: Rear Panel Description

    5. MAXIMUM OUTPUT GAIN REDUCTION control: This rotary control decreases the maximum Level of the balanced and unbalanced MAIN OUTPUTS of the MP 24 as it is rotated CCW. 6. METER SENSITIVITY ADJUST: Clockwise rotation decreases the full-scale sensitivity of the PEAK PROGRAM METER, as indicated by the full-scale voltage calibrations around the control.
  • Page 5 28. POWER input connector: No, this is not where Commissioner Gordon plugs in his Bat-phone, in fact it is not a telephone jack at all. The MP 24 uses an 18 volt AC center-tapped transformer only. Use only a model RS 1, or other remote AC power supply approved by Rane.
  • Page 6: System Connection

    This is a good place to discuss the problems encountered line devices feeding the MP 24 is of the commercial variety in connecting the MP 24 to all of the different types of cables sporting balanced outputs, use Line 2 for this due to its and connectors that one finds when basing a system on unique ability to accept such foreign substances.
  • Page 7: Operating Instructions

    Crossfade from 2 to 4 by sliding the fader to the before they reach the Input of the MP 24. If this is not left, however it’s just an unavoidable oddity caused by having so much flexibility.
  • Page 8: Important Note

    Be sure this switch is in the ACTIVE position if booth at no charge separately) for further information on system speakers are used. grounding. ©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5098 TEL (425)355-6000 FAX (425)347-7757 WEB http://www.rane.com Manual-8...

Table of Contents