Tunturi Platinum User Manual page 4

Step 2: Upright tube and Moving Handlebars
1. Unravel the computer cable (31) and snake it through
the bottom of the upright tube (12) and out the top.
Secure the upright tube to the main frame with four
M8 x 25mm bolts (113). Mount the upright tube
covers (65 left & 67 right) and secure with six M5mm
x 12mm Phillips head screws (77).
2. Install two M5 x 12mm Phillips head screws (77)
and two wave washers (114) onto the upright tube
axle and then install the moving handlebars (10 left
& 11 right) onto the axles. Do not force them or use
a hammer as damage to the bearings can occur. The
2.
English
4
moving handlebars have been previously assem-
bled at the factory to assure the correct fi t. Secure
the arms with two 3/8" x 3/4" Socket hex head
bolts (115) and 3/8" fl at washers (130). Attach
the bottom of the moving handlebars to the rod
ends of the pedal tubes using two M10 x 38mm
bolts (117) and M10 nyloc nuts (116).
3. Install the Bottle Holder (70) onto the console mast
with two M5x12mm Phillips Head Screws (77).