Register To Vms; Bnc Output - Kedacom IPC Series User Manual

5.2 Register to VMS

Go to Settings>Network>Access Protocol>VSIP, as shown in Picture 5-3 to enter VMS
address and port. Save settings and reboot device.

5.3 BNC Output

Camera with BNC output can output analog image directly when local display function is
enabled.
Go to Settings>Camera>Image>Rotate and BNC, select BNC output mode from the
drop-down list, as shown below.
Picture 5-2 PPPoE Setting
Picture 5-3 Register to VMS
25