Table of Contents
Advertisement
1)
Make sure the alarm input device is always enabled or disabled, and that it is rightly
connected to the alarm input port of camera.
2)
Go to Settings>Event>Alarm Input, and select an alarm input ID from the dropdown
list (in accordance with the alarm input port).
Input alarm name, and select "Always Enabled" or "Always Disabled" from the
3)
dropdown list of alarm type.
Click "Edit" and set durations at the popup interface. Check durations and set "Start
4)
Time" and "End Time". Check the week day(s) to copy the setting to the day(s).
Check "Linkage Method".
5)
Click "Save" to finish setting.
6)
4.4.4
Abnormality Linkage
It is triggered when something abnormal happens. Abnormality includes Disk Full,
Disk Error and Internet Disconnected.
1)
Select Abnormality Type from the dropdown list.
Check "Linkage Method".
2)
Click "Save".
3)
4.5 Privacy Mask
Mask sensitive and private part of the image so as to keep sensitive information private.
Picture 4-6 Abnormality Linkage
16
Advertisement
Table of Contents
