Set Area; Clear Area; Sdi Output - Kedacom IPC Series User Manual

4.7.1

Set Area

Go to Settings>Camera>Video >ROI, and check "Enable". Click "Edit", and drag
an area as the clipping area. Select encoding grade from the dropdown list. Click
"Save" to make settings effective.
4.7.2

Clear Area

Click "Clear" to clear edition and reset area.
Note: When ROI Encode is enabled, if user modifies image resolution or aspect ratio (standard
screen/widescreen), the device will quit ROI Encode automatically.

4.8 SDI Output

For cameras with HD-SDI output function, when the resolution is 1080P, frame rate supports
25 fps, 30 fps, 50 fps and 60 fps; when the resolution is 1080i, frame rate supports 50 fps and
60 fps; when the resolution is 720P, frame rate supports 50 fps and 60 fps. Go to
Settings>Camera>Video>Encoding Format and set.
Note: Settings on resolution and frame rate are also effective to SDI output.
Picture 4-10 Encoding Format
19