4.4.1
Motion Detection Alarm Linkage
1)
Enable Motion Detection, and set the detection area and sensitivity. Please refer to
Chapter 4.2 Motion Detection for details.
2)
Check the Linkage Type for motion detection. For example, if user checks Snapshot,
when alarm is triggered, the system will take a snapshot. In
Settings>Storage>Snapshot interface, user can set picture format, resolution,
interval and quantity.
4.4.2
Tempering Alarm Linkage
1)
Enable Tempering Alarm, and set the area and sensitivity. The method is the same
as that of Motion Detection.
2)
Check Linkage Type.
Click "Save" to finish setting.
3)
4.4.3
Alarm Input Linkage
The camera supports on/off alarming device.
Picture 4-5 Alarm Input
15