4.5.1
Set Area
The image is divided into 16 columns and 12 rows of small squares. The maximum
number of Privacy Mask area is 4.
Go to Settings>Camera>Video >Privacy Mask, and check "Enable".
1)
Click "Edit", and the image is divided into 16 columns and 12 rows of small squares.
2)
Click any square and drag an area from this square, then this area is the privacy
mask area, which is in purple red.
3)
Select Mask Color from the drop-down list.
Click "Save" to make settings effective.
4)
4.5.2
Clear Area
Start from an undefined square and draw an area that contains the defined area, or
click the defined squares one by one to clear setting, or click "Clear" directly. Click
"Save" to make settings effective.
4.5.3
Disable Function
To disable this function, uncheck
4.6 Encoding Clipping
After user defines the encoding area, the system will encode and display the clipping area
only, so as to save system resources and network bandwidth.
Picture 4-7 Privacy Mask
Enable.
17