Table of Contents
Advertisement
3.2.2
Login Web Client
1)
After modification, camera will reboot automatically. Please wait patiently. After
reboot, the button will be enabled again. Please select this device again and click
"Login" or double click device name to enter web client. Interface is shown in Picture
3-4.
Note: If log in the non-activated device through web client for the first time, user can set admin
password and activate the device in the login interface, as shown below. Complicated password is
recommended, e.g. combination of letters and digits above 8 bits.
2)
Enter user name and password: when log in successfully for the first time, download
and install the plug-in. Close browser when installing and re-login afterwards.
Interface after login is shown in Picture 3-6.
Picture 3-4 Web Client Login Interface
Picture 3-5 First login through web client
5
Advertisement
Table of Contents
