Motor Cooling; Storing The Machine - Stihl HTA 65 Instruction Manual

English
The drive link tangs will otherwise
scrape along the bottom of the groove –
the cutters and tie straps will not ride on
the bar rails.
30

Motor Cooling

Use a dry brush or similar tool to
N
clean the cooling slots at regular
intervals.

Storing the Machine

Move the retaining latch to ƒ.
N
Remove the battery.
N
Remove the saw chain and guide
N
bar, clean them and spray with
corrosion inhibiting oil.
Thoroughly clean the machine,
N
especially the cooling air inlets.
If you use a biological chain and bar
N
lubricant, e.g. STIHL BioPlus,
completely fill the chain oil tank.
Store the machine in a dry and
N
secure location – out of the reach of
children and other unauthorized
persons.
Cover for battery compartment (special
accessory)
The cover prevents dirt falling into the
empty battery compartment.
After finishing work, slide the
N
cover (1) home until it engages
audibly in position.
HTA 65, HTA 85
1