Crankcase Breather - Oil Separator Replacement, Diaphragm Check And Replacement - MTU 12 V 2000 M92 Operating Instructions Manual

7.4.2 Crankcase breather – Oil separator replacement, diaphragm check and
replacement
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Torque wrench, 6-50 Nm
Ratchet adapter
Filter element
Diaphragm
O-ring
WARNING
Hot oil.
Oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
Replacing filter element of oil
separator
1. Remove cover (2) with O-ring (3).
2. Remove filter element (1) from housing (4).
3. Insert new filter element into housing (4)
ensuring correct installation position, and fit
cover (2) with new O-ring.
4. Tighten screws of cover (2) to specified tightening torque.
Name
Screw
5. Replace filter elements of further oil separators in the same way.
Size Type
Tightening torque
Part No.
F30027336
F30027340
(→ Spare Parts Catalog)
(→ Spare Parts Catalog)
(→ Spare Parts Catalog)
Lubricant
M015700/06E 2012-06 | Task Description | 71
Qty.
1
1
Value/Standard
6 Nm + 2 Nm