MTU 12 V 2000 M92 Operating Instructions Manual page 72

Checking diaphragm
1. Remove cover (4).
2. Take off spring (5), seal (2) and diaphragm
(3).
3. Check diaphragm (3) for damage.
4. Fit new diaphragm if used one is damaged.
5. Mount diaphragm (3) on housing (1).
6. Install new seal (2) and spring (5) together
with cover (4).
7. Tighten screws of cover (4) to specified tightening torque.
Name
Screw
8. Check diaphragms in further oil separators in the same way.
72 | Task Description | M015700/06E 2012-06
Size Type
Tightening torque
Lubricant Value/Standard
6 Nm + 2 Nm