Fuel Treatment System - Switching On - MTU 12 V 2000 M92 Operating Instructions Manual

4.7 Fuel treatment system – Switching on
Preconditions
☑ The on-board power supply is switched on.
CAUTION
Damage to engine/plant.
Major material damage!
• Before switching on, ensure that the engine/plant is ready for operation.
• Before switching on, ensure that all housings are closed.
• Before switching on, ensure that no work is in progress anywhere on the entire system.
Switching on fuel treatment system
1. Carry out checks prior to start-up (→ Page 41).
2. Switch on master switch on switch cabinet.
Result: Signal lamp "Control voltage present" lights up.
3. Switch on switch for pump.
Result: Signal lamp "Pump running" lights up.
M015700/06E 2012-06 | Operation | 45