Table of Contents
Advertisement
Installation
Electrical connection
The appliance is usually supplied fitted with a power cord. The
supply cable should be positioned so that it does not reach a
temperature of more than 75℃ along its entire length.
Connect the cable directly to the mains, connection to the
electricity supply must be made by an authorised person in
accordance with the Wiring Rules AS/NZS3000. The installation
must include a suitable isolating switch with a minimum contact
opening of 3mm between the appliance and the mains. The
isolating switch should be sized according to the load on the data
label and should comply with current regulations (the earth wire
should not be interrupted by the circuit breaker).
Before making the connection check that:
· the switch, wiring and electrical system can support the
appliance load (see data plate);
· the power supply system has an efficient earthing connection
which complies with the provisions of current regulations;
· the power outlet or omnipoar circuit-breaker is easily accessible
once the cooker has been installed.
Replacing the power supply lead
If the supply cord or plug is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person in
order to avoid hazard.
Before leaving
When the installation is complete, operate each element and the
oven to check that they are operating correctly. Make sure the
indicator lights are also operating correctly.
When satisfied with the operation, please instruct the user on the
correct method of operation. In case the appliance fails to operate
correctly after all checks have been carried out, please call the
Technika Service Centre.
31
Hide quick links:
Advertisement
Table of Contents
