Key Combinations - Panasonic CF-48 Series Reference Manual

Key Combinations

CAUTION
Do not press the following key combinations repeatedly in (quick) succession.
Do not press the following key combinations while using the touch pad (mouse) or other keys.
Key Functions
LCD brightness con-
Fn + F1
trol ( down)
Fn + F2 LCD brightness con-
trol ( up)
Display change
Fn + F3
Speakers on/off switch
Fn + F4
Volume control
Fn + F5
( down)
Fn + F6
Volume control ( up)
Windows 98 Power off using the
Windows 2000 standby function
*
Fn + F7
Remaining capacity of
Fn + F9
the battery pack
*
Power off using the hi-
Fn + F10
bernation function
*
When [Disable] is set for [Fn+F7/Fn+F10 Key] with the Setup Utility, these key combinations become inoperable.
Pressing this key combination adjusts the bright-
ness of LCD. The brightness setting is stored in
memory separately under the condition the AC
adaptor is connected and under the condition the
AC adaptor is not connected.
By pressing this key combination, you can select
either an exter nal display, LCD or simultaneous,
even if an external display is not connected.
( page 35)
Pressing this key combination turns on/off audio
from the internal speakers and headphone jack.
Rebooting the computer, or powering off then on,
restores the speaker setting of the Setup Utility.
CAUTION
Disabling the speakers will also disable the
warning beep.
Pressing this key combination adjusts the volume
of the internal speakers and headphone jack.
NOTE
This key combination cannot be used to adjust
the volume of the warning beep.
Pressing this key combination causes the current
screen on the display to be saved to memory, and
powers off the computer. (
Pressing this key combination displays the remain-
ing battery capacity on the screen. (
Pressing this key combination causes the current
screen on the display to be saved to the hard disk,
and powers off the computer. (
Popup Window
page 7)
page 22)
page 7)
3
OFF
ON
Down
Up
Remaining
capacity (%)
display
Battery pack is
not installed.