Panasonic CF-48 Series Reference Manual page 58

Dealing with Problems
Starting Up
Windows NT
NT does not start up
Shutting Down
Unable to shut down Win-
dows
Battery Indicator
The red indicator lights.
Repeated beeping sound
while the computer is in
use.
The red indicator blinks
The orange indicator
blinks
Touch Pad
Unable to input using the
touch pad
Character Input
Only capital letters are
being input
How to input European
characters (ß, à, ç), sym-
bols or Euro Currency
Symbol is unclear
Try the steps listed below.
1 Power off the computer, and then power it on again.
2 When [Press spacebar NOW to ...] is displayed, press the space key.
3 When [Hardware Profile/Configuration Recover Menu] is displayed, follow the on-
screen instructions.
Do not shut down Windows during music playback.
The battery level is low. Save your data and power off your computer.
After connecting the AC adaptor or replacing the battery pack with a fully charged
one, turn your computer on.
The battery pack or recharging function may be defective. Quickly remove the
battery pack and disconnect the AC adaptor, then connect them again.
If the problem persists, contact Panasonic Technical Support.
Unable to charge because of an improper temperature range. (
tions")
Has the Setup Utility been used to set [Touch Pad] to [Enable]? (
When mouse drivers are installed (e.g., Intellimouse), the touch pad is unable to
be used.
Has the touchpad driver been properly installed?
If CapsLock is on, the Caps Lock function is ON. To switch it OFF , press
Caps Lock .
Windows 98 Windows 2000
Select [Start] - [Programs] - [Accessories] - [System Tools] - [Character Map].
The Character Map will be displayed. Point to the desired font name and select it.
Windows NT
Select [Start] - [Programs] - [Accessories] - [Character Map]. The Character Map will
be displayed. Point to the desired font name and select it.
(Advanced)
58
"Precau-
page 47)