Hard Disk Drive - Panasonic CF-48 Series Reference Manual

Hard Disk Drive

To change your hard disk drive, contact Panasonic Technical Support
Cover
Latch
Hard Disk
Tab
Mark
CAUTION
To customers:
To change your hard disk, contact Panasonic Technical Support.
Be sure to back up all important data before the change.
If [Hard Disk Lock] is set to [Enable] in the Setup Utility, change this to [Disable]
before the change.
To technicians (at Panasonic Technical Support):
Be careful when replacing the hard disk. The hard disk is extremely sensitive to
shock. In addition, static electricity could later affect some internal components.
Installing/Resuming the hard disk
(For technicians at Panasonic Technical Support)
1
Power off your computer
Do not shut down using the standby or hibernation function.
Disconnect the AC adaptor.
2
Turn your computer over and remove the cover
Slide the latch, and then without releasing it, slide and remove the cover.
3
Removing the hard disk
Carefully lift the hard disk and remove it from the connector.
4
Inserting the hard disk
Connect the hard disk to the connector and carefully insert the hard
disk.
CAUTION
The hard disk may be damaged if its top and bottom are confused.
5
Close the cover
Match the mark on the cover to the body of the computer and slide the
cover back into place.
CAUTION
Be sure the tab does not get caught when closing the cover.
( "Starting Up/Shutting Down")
45