Panasonic CF-48 Series Reference Manual page 53

Technical Information
When Adding New Software or Hardware Components
Enabling Power Conservation
Windows Security Function
Precautions When Using a CardBus Type LAN Card
Some of the contents of Service Pack 6 (installed at the time of purchase) may be
overwritten. Therefore, after adding a new software or hardware component, be sure
to install (UPDATE) Service Pack 6. (See the c:\sp6\readme.htm file.)
<Only if necessary>
In addition, if you install Service Pack 6, some files of Phoenix APM 2.0 for Windows
®
NT and Phoenix Card Executive 2.0 for Windows NT
fore, after installing Service Pack 6, also re-install Phoenix APM 2.0 for Windows NT
and Phoenix Card Executive 2.0 for Windows NT
At times you may be prompted to copy Windows NT
the copy source and select [OK].
<Installing Service Pack 6>
In [Star t]-[Run], input [c:\sp6\sp6i386.exe] and select [OK]. Follow the on-screen
instructions.
Confirm that Phoenix APM 2.0 for Windows NT
displayed in [Control Panel], this means that the program is installed.) If the program is
not installed, be sure to install it. (
Windows NT
®
Windows NT or Windows 2000 has a security function that differs from the security
function of the Setup Utility. For detailed information, refer to the Windows help.
NOTE
Set the password for secrecy and protection.
Only an account for the Administrator is created the first time the computer is
started. Create accounts for person or persons who are actually going to use a
computer.
We recommend using an NTFS file system in order to use the Windows security
function.
Prior to usage, optimize the LAN card settings by following the procedure given below.
Failure to do so may result in an error message being displayed when performing a
copy operation via the LAN card with a computer on the network.
1 Double-click the Network Card you are using from [Network adapters] in [Control
Panel] - [System] - [Hardware] - [Device Manager]
2 Select [Advanced], select [Store And Forward] from [Property], then set [Enabled] for
[Value] if it is set to [Disabled]
(This item may be unavailable for some types of network cards.)
Windows NT
®
is installed. (If [APM 2.0 for NT] is
page 19)
Windows 2000
Windows NT
®
may be overwritten. There-
®
.
®
files. Input [c:\winnt\i386] as
Windows 2000
53
®