Usb Devices; Removing Usb Devices - Panasonic CF-48 Series Reference Manual

USB Devices

USB Port
Windows 98
NOTE
Windows NT USB devices are not supported.
Installing USB devices
1
Power off your computer
Do not shut down using the standby or hibernation function.
2
Connect the USB device to your computer
NOTE
For more detailed information, refer to the operation manual of the
USB device.
You may need to install drivers compatible with the OS you are using
for your USB devices. Follow the on-screen instructions and refer to
the operation manual for USB devices on how to install the driver.
When a USB device is connected, there are cases the standby or hiber-
nation function will not operate in a normal manner due to the USB de-
vice. In addition, a USB device may have to be removed temporarily and
the computer restarted in cases where the computer is unable to start
up properly.

Removing USB devices

CAUTION
Do not remove a USB device while your computer is in the standby or
hibernation mode.
1
Windows 2000
Double-click
vice, then select [Stop]
Follow the on-screen instructions.
(When is not displayed or when the USB device has been removed
after the computer is turned off, this step is not necessary.)
2
Remove the USB device
Windows 2000
(
on the taskbar and select the USB de-
"Starting Up/Shutting Down")
38