18. Disassembly and Assembly Instructions
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding with
repair work. Failure to heed this caution may result in electric shocks.
18.1 CS-RE9SKUA CS-RE12SKUA
18.1.1
Indoor Electronic Controllers, Cross Flow Fan and Indoor Fan Motor Removal
Procedures
18.1.1.1
To Remove Front Grille
18.1.1.2
To Remove Horizontal Vane
2.
Remove 2 caps and 2 screws at the
bottom discharge vane.
WARNING
3.
Figure 1
Hook
Figure 2
104
Hold both sides of the front grille and
remove it by pulling up and toward
yourself gently.
1.
Lift to open the horizontal vane
gently.
4.
Remove the control
board cover by
releasing the hook.