Panasonic CS-RE9SKUA Service Manual page 105

18.1.1.3 To Remove Power Electronic Controller
Figure 3
18.1.1.4 To Remove Discharge Grille
8. Pull out the main
electronic controller
halfway.
5. Detach the Earth wire
screw.
7. Remove screw to remove
terminal board complete
and earth wire.
6. Detach the CN-DISP
connector then remove
the indicator complete.
11. Then pull out the discharge grille
downward gently to dismantle it.
Figure 5
105
9. Detach connectors as labeled from
the electonic controller. Then pull out
main controller gently.
10. Pull out to remove the drain hose
from the discharge grille.
CN-FM
CN-RMT
CN-STM1
CN-MSENS
CN-DISP
CN-TH
Figure 4