Response Electronics miGuard G5 Installation And Operating Instructions Manual page 31

Settings
Camera
Sharing QR
Code
Setting
Button
Device ID
Share or Stop Sharing Camera with Your Friends
Quick Guide
Show or send the QR code of your camera to
your friends, they can simply add the camera
IP113 HD WiFi Camera
by choosing the [QR code] on their App and
then scan.
If you want to stop sharing the camera, please
change the password of camera.
Password
All the successfully paired phones have the same authority as
administrator who can view and set the camera (including changing
the password), so it is recommended to pair the phones of users
with caution. For non-administrator users, you can share the camera
by sending the QR code for them to scan.
Sync the Date and Time
Check if the camera's date and time are set correctly. Sync them
with your phone's time if necessary.
Enjoy the App
Snapshot
Record
Hold To Talk
Speaker
Installation
Important: This camera should be placed where the WiFi signal is strong
for optimal performance before installation.
①
②
③
Specification
Image sensor Sony 1/3" CMOS Sensor
Min. illumination Color: 0.01Lux@ (F1.2, AGC ON)
Black and white : 0.001Lux@ (F1.2,
AGC ON)
Shutter time 1/50s to 1/100,000s
Lens 2.4 mm F2.0
Angle of view 110°
Video compression H.264
Bit rate Self - adaption
Max. image resolution 1280 x 720
Frame rate 30fps (1280 × 720)
Storage Built-in microSD card slot, up to 32GB
Wireless standards IEEE802.11b/g/n
Frequency range 2.4 GHz ~ 2.4835 GHz
Channel bandwidth 20/40MHz Support
Operating conditions Temperature: -30 °C - 60 °C
(-22 °F - 140 °F)
Humidity: <95% (non-condensing)
Power supply DC 5V 2A
Power consumption 5W MAX
Dimensions (L x W x H) 91 x 78 x 115 mm
Quick Guide
IP116 HD WiFi Camera