Arm & Disarm By Free Phone Call; Connect Additional Wireless Accessories & Rfid Tags; Connect Additional Wireless Sensors; Connect Additional Rfid Tags - Response Electronics miGuard G5 Installation And Operating Instructions Manual

Arm & Disarm by free phone call
To arm the alarm system by free phone call, call the SIM card telephone number in the
Control Panel. When you hear the dial tone hang up. The Control Panel will be armed
and will call you back with 2 rings to confirm.
To disarm the alarm system by free phone call, call the SIM card telephone number. After
6 rings the system will terminate the call (the Control Panel won't answer the call). The
alarm system will not call you back this time and will be disarmed.
IMPORTANT: To arm or disarm the alarm system make sure that voicemail is
disabled on the SIM card of the alarm system.
Connect additional Wireless Accessories & RFID Tags

Connect additional Wireless Sensors

The included sensors are already paired with the Control Panel by default.
To pair an additional PIR Sensor refer to the instructions on page 36.
To pair an additional Door/Window Sensor refer to page 40.

Connect additional RFID Tags

Enter the password and press the
Hold an RFID Tag in front of the blue circle on the Control Panel. When you hear a beep
from the Control Panel the RFID Tag is paired successfully. If you hear the Control Panel
beep twice the RFID Tag has already been paired.
IMPORTANT: The RFID will only function when the Control Panel is connected to mains
power.

Connect and delete Wireless Sirens

The Siren is an additional accessory. Press the connect button on the Siren Unit for 0.5
seconds. The Siren will beep once and its LED starts to flash. Now press the
on the Control Panel. You will hear a single beep when paired successfully. To delete the
Siren hold the connect button on the Siren for about 5 seconds until a double beep is
heard. The Control Panel is now deleted from the Siren.
31
button on the Control Panel. The button lights up.
arm button

Remote Control

Remote Control overview

Arm

Home Mode
(Part-arm)
Arm
Press
will light up and the Siren will beep once to confirm the
alarm system is armed.

Disarm

Press
will light up and the Siren will beep twice to confirm the
alarm system is disarmed.
LED Indicator
Disarm
SOS button
to arm the alarm system. The LED indicator
to disarm the alarm system. The LED indicator
32