Speed Dial; Phone Dial; Disarming The Alarm System By Sms; Arming The System By Sms - Response Electronics miGuard G5 Installation And Operating Instructions Manual

Speed dial

When you press the system will dial the preset speed dial number immediately. The
call ends when you press again. Instructions on how to store a speed dial number
can be found on page 22.

Phone dial

You can directly enter a phone number and press the
and you can make the call via the Control Panel's built-in microphone and speaker.
When you press again the call is ended.
13
button. The system dials out

Disarming the alarm system by SMS

The main menu, received after texting '?', will display the command for disarming the
system ('0'). To disarm the system text '0' to the number of the SIM card in the Control
Panel.
0
After sending the message you will receive the following message from the Control
Panel to confirm the new setting:
System disarmed.

Arming the system by SMS

To arm the system text '1' to the number of the SIM card in the Control Panel.
1
After sending the message you will receive the following message from the Control
Panel to confirm the new setting:
System armed.

Home Mode (Part-arm) the system by SMS

To Part-arm the system, text '2' to the number of the SIM card in the Control Panel.
2
After sending the message you will receive the following message from the Control
Panel to confirm the new setting:
System in home mode.
14