Home Mode (Part-Arm); Mute Mode; Emergency Call; Connect A New Remote Control - Response Electronics miGuard G5 Installation And Operating Instructions Manual

Home Mode (Part-arm)

Press
All sensors in the home group will be inactive. This
means you can part arm the house.

Mute Mode

Press and hold the
press
be armed or disarmed without the external siren making
any noise. The alarm system can be controlled without
disturbing neighbours.

Emergency Call

Pressing the
activate the alarm immediately (whether the system is
armed or disarmed). The Siren will sound at the Control
Panel and external Siren (if fitted).

Connect a new Remote Control

Enter the password on the Control Panel and press
light up.
Press a button on the Remote Control to connect with the Control Panel.
The Control Panel will beep once when paired successfully. It will beep twice if it has
already been paired.
33
. All sensors in the normal group will be armed.
button for 1 second, and then
or within 3 seconds. The alarm system will
SOS button on the Remote Control will
the button. The button will

Pet Friendly PIR Sensor

PIR Sensor overview

1 2

LED Indicator

: Motion Sensor performs a self-testing
Blink continuously
: Motion detected
Blink once
: 3 minutes testing is finished, enters power saving mode.
Blink twice
: Low battery indication, please change the batteries
immediately
Note: When the PIR battery level is low the Sensor will send an SMS message
to the administrator for notification.
1. Detection windows
2. LED indicator
3. Wall mount
34