Adding a call
1. While on an active call, press the
Conference button
call is automatically placed on
hold.
2. Dial the number you wish to call.
You may use the Redial or Direct
Dial method.
3. Press the Conference button
or
soft key to join the second
JOIN
call. To drop the second call,
press the Conf key again.
Bridge Soft Key
You may program the telephone number of
your preferred audio conferencing bridge or
service into the SoundStation2 so that it is
immediately available.
Programming the Bridge number
1. Press the Menu button
choose Bridge Setup using the
Scrolling buttons,
the Select button
2. Choose Enter Phone Number and
press the Select button
then enter the bridge number using
the dial pad. Enter any necessary
prefix such as 9 and/or 1.
► If you make a mistake entering the
number, use the
correct the error.
3. Press the
SAVE
if you wish to cancel the
soft key
procedure.
. The first
,
and press
.
and
soft key to
<DEL
soft key or
CANCEL
SoundStation2 User Guide - 15
OR
1. Press the
HOLD
the first call on hold.
2. Press the Conference button
and enter the number you wish to
call. You may use the Redial or
Direct Dial method.
The SPEED DIAL soft key will not
display when the bridge number
is configured.
SETTINGS
PHONE BOOK
THIS PHONE
BRIDGE SETUP
BRIDGE SETUP
ENTER PHONE NUMBER
EDIT SOFT KEY
soft key to place