Location Information - Polycom SoundStation2 User Manual And Administrator Manual

Change the passcode:
1. From the Admin Setup menu, choose
Passcode using the Scrolling buttons
and press the Select button
.
2. Press the
CHANGE
current passcode, and press the
soft key. If you decide not to change
the password, press the
key or the Exit button
►If you enter an incorrect password,
you will be notified to try again.
►If you make an error, press the
soft key to erase the error.
<DEL
3. You will be prompted to enter a new
passcode. Enter a new passcode and
press the
SAVE
press the
CANCEL
button
save the passcode.
► Record the passcode. If the passcode is forgotten,
contact Polycom Support at www.polycom.com/
support and click on "How to Contact Support and
Service" for your local support contact informa-
tion.

Location Information

You can assign a location, such as "Conference Room B" and
the telephone number associated with your SoundStation2.
Assigning a location name:
1. Press the Menu button
choose Admin Setup and press
the Select button
passcode (if required) and press
the soft key. Choose Loca-
ENTER
tion using the Scrolling buttons
, and press the Select button
.
soft key, enter the
CANCEL
.
soft key. You may
soft key or the Exit
if you choose not to
,
, enter
SoundStation2 Administrator Guide - 26
PASSCODE
ASSIGNED
CHANGE
ENTER
soft
ENTER CURRENT
Passcode:_
CANCEL
ENTER NEW
Passcode:_
CANCEL
LOCATION
LOCATION NAME
THIS PHONE #
REMOVE
ENTER
<DEL
<DEL SAVE
LOCATION