Restore Defaults - Polycom SoundStation2 User Manual And Administrator Manual

►White Noise is a signal
whose energy is distributed
uniformly among all frequen-
cies within a band of interest,
which for the SoundStation2
is approximately from 300 to
3,400 Hertz.

Restore Defaults

Restoring the defaults will irretrievably remove all
settings and data that have been entered since the
SoundStation2 was first installed.
1. Press the Menu button
choose Admin Setup and press
the Select button
passcode (if required) and press
the soft key. Choose
ENTER
Diagnostics using the Scroll-
ing buttons
Select button
2. Choose Restore Defaults using
the Scrolling buttons
press the Select button
Press the
OK
to restore defaults or the
soft key or the Exit button
to return to the Diagnostics
submenu.
,
, enter
, and press the
.
, and
.
soft key if you wish
CANCEL
SoundStation2 Administrator Guide - 30
3. Press the Select button to acti-
vate the signal.
►Phone Book entries and Speed
Dial numbers are not lost when
restoring all defaults.