Panasonic KX-VC1300 User Manual page 42

Preparation
Note
•
If the icon shows only 0–1 bars continuously, contact your network administrator.
•
During multiple-party video conference calls, the icon is displayed on each site screen, but not on
your own image.
•
You can set whether to display the icon. This setting affects all displayed images (excluding your
own image) (Page 110). For example, if icon display has been enabled, the icon will be displayed
on the image of all other parties, but not on your own image. However, if icon display has been
disabled, the icon will not be displayed on any of the images. Regardless of icon display settings,
the icon is not displayed while the combined computer/video feed screen is being displayed.
Other Site's Audio Indication (
Displayed on the Main Site when "Other Site's Audio" is set to "Mute" during a multiple-party video
conference call using the built-in MCU (Page 72, Page 97).
Dialling Indication (
Displayed when a call is incoming at another site, such as when a site is added during a call or when a call
is made (Page 62).
Presentation Mode Indication (
Displayed for the main site for video conference calls with multiple connections that use an internal MCU
when MCU mode is Presentation Mode (Page 69, Page 97, Page 111).
Status Indication
The status of the unit is indicated by icons (Page 39).
Note
•
Pressing [FULL SCREEN] on the remote control will hide or unhide the other party's information,
duration, network status indication
*1 If the network status indication has been set to not be displayed, pressing [FULL SCREEN] will not show the icon.
42 User Manual
)
)
)
, and guide displays.
*1
Document Version 2015-12