Weigh Averaging - Acculab ALC series Operating Instructions Manual

www.balances.com is your Acculab deep discount distributor

Weigh Averaging

Purpose
Use this program to determine weights under unstable ambient conditions.
In this program, the balance/scale calculates the weight as the average value
from a defined number of individual weighing operations. These weighing
operations are also known as "subweighing operations" or "subweighs."
Available Features
– The measured result displayed is the arithmetic mean shown in the selected
weight unit; a triangle indicates that this is a calculated value
– You can set the number of subweighing operations performed in the operating
menu: See "Configuring the Balance/Scale"
– Press [F] for at least 2 sec. to display the preset number of subweighing
operations
– Press [F] to toggle the display between the calculated result and the weight
Factory Settings
Number of subweighs for averaging: 10 (3. 3. 2)
Preparation
§ Configure the Weigh Averaging application in the operating menu:
See "Configuring the Balance/Scale"
Menu code 2. 1.12 Averaging
– Number of subweighs for weigh averaging:
5 subweighs
3. 3. 1
10 subweighs
3. 3. 2
20 subweighs
3. 3. 3
50 subweighs
3. 3. 4
100 subweighs
3. 3. 5
See also "Configuring the Balance/Scale"
15