How Can I Extend The Life Of The Battery; How Do I Turn The Hotspot Off; How Do I Find Out How Many Users Are Connected To My Hotspot's Wi-Fi Networks; Is Still Powered On - NETGEAR AirCard 810S User Manual

How can I extend the life of the battery?

For information about extending the life of the battery, see

How do I turn the hotspot off?

Press and hold the Power key for a few seconds.
How do I find out how many users are connected to my
hotspot's Wi-Fi networks?
The number on the Wi-Fi icon on the hotspot's touch screen is the number of users (or
devices) connected to your Wi-Fi network. A list of connected devices appears in the hotspot
Connected Devices section. For more information about the devices or users connected to
your network, see
The touch screen is not lit. How do I know if the hotspot

is still powered on?

The touch screen dims to save energy. The LED continues to blink slowly to indicate that the
mobile hotspot is still powered on. To wake up the touch screen, press and quickly release
the Power key.

How do I find my computer's IP address?

The steps for finding your computer's IP address depend on the operating system. If your
device runs an operating system not listed here, see the appropriate operating system
documentation.

To find the IP address on a Windows 7 , Windows Vista , or Windows XP device:
1. Open the command prompt window:
a. Select Start > Run.
b. Enter cmd or command and click the OK button.
2. At the command prompt, enter ipconfig and press the Enter key.
3. Write down the IP address for the entry that relates to the wireless network connection.
The IP address might be listed under IPv4 Address or something similar.

To find the IP address on a Windows 8 device:
1. In the Charms bar, click the Search icon.
Telstra Wi-Fi 4GX Advanced III
View or Block Connected Users
Frequently Asked Questions
Extend Battery Life
on page 31.
92
on page 45.