Table of Contents
Advertisement
Extend Battery Life
By default, the Jetpack is configured to optimize battery life. You can extend the battery life in
several ways:
•
When you're not using your Jetpack, turn it off.
•
Tether your Jetpack to your computer using the micro-USB cable, and disable Wi-Fi. For
more information, see
•
Adjust the Jetpack display settings:
-
Decrease the brightness of the Jetpack display. For more information, see
Screen Settings From the Jetpack Admin Website
-
Set the Jetpack display to turn off sooner. For more information, see
Jetpack Screen Settings
•
Use a shorter Wi-Fi inactivity time-out period. For more information, see
Wi-Fi Sleep Settings
•
Limit the number of Wi-Fi devices that can connect to the Jetpack Wi-Fi network. For
more information, see
•
If only one network coverage type is available to you (LTE or 3G), set the allowed network
mode to that coverage type only. For more information, see
Technology Mode
Adjust the Jetpack Screen Settings
The Jetpack's display is automatically set to dim to save energy.
You can adjust the following display settings:
•
Adjust the brightness level.
•
Set the time-out to a shorter period to reduce the amount of time that Jetpack display is
not touched before the screen turns blank.
•
Use Stealth mode for discreet use. Stealth mode keeps the LCD screen off until the
Power button is pressed (the LCD does not light for any notifications)
Adjust the Screen Settings From the Jetpack Display
To adjust the screen settings using the Jetpack display:
1.
Verify the Jetpack is powered on.
Verizon Jetpack® 4G LTE Mobile Hotspot - AC791L
Configure a Tethered Connection
on page 46.
on page 48.
Set the Maximum Number of Connected Devices
on page 67.
Manage Your Jetpack
46
on page 21.
on page 47.
Adjust the
Set the Jetpack's
on page 37.
Set the Allowed Network
Adjust the
Advertisement
Table of Contents
