Note:
This feature is available to Windows computer users. If you are a Mac
user, do not enable this option because you will be unable to access
your device.
To enable IP pass through mode:
1.
From a computer or wireless device that is connected to your network, launch an
Internet browser.
2.
Enter http://m.home or http://192.168.1.1.
A login page displays.
3.
Enter the administrator login password.
The default password is admin. The password is case-sensitive.
The Home page displays.
4.
Select Settings > Router > Basic.
5.
In the LAN section, select the Enabled radio button next to IP Passthrough Mode.
6.
Click the Submit button.
Enable VPN Pass Through
To connect to a corporate network using VPN, you must first enable VPN connections (pass
through).
Telstra Wi-Fi 4GX Advanced III
Advanced Settings
79