Connect To Wi-Fi From Wireless Device - NETGEAR AirCard 810S User Manual

Note: When you change your profile options (including disabling or enabling
either Wi-Fi network), any devices connected to the hotspot are
disconnected and might need to be reconnected.

Connect to Wi-Fi from Wireless Device

You can connect up to 15 wireless devices (such as smartphones, laptops, tablets, digital
cameras, printers, gaming consoles, and digital picture frames) to your hotspot network. For
information about setting connections for main Wi-Fi and guest Wi-Fi networks, see
Maximum Number of Connected Devices
You can add a wireless device to your Wi-Fi network manually. If the device that you are
adding is WPS enabled, you can use the WPS method to connect the device without using
the Wi-Fi password.
Connect with the Wi-Fi Password
1. On the wireless device, view the list of available Wi-Fi networks.
2. Connect to the network that corresponds to your hotspot network as displayed on the touch
screen.
3. When prompted, enter the Wi-Fi password for your hotspot network.
The Wi-Fi password displays on the hotspot touch screen. If the screen is turned off,
press and quickly release the Power key to wake the hotspot.
Add a WPS-Enabled Device
You can add a WPS-enabled Wi-Fi device to your Wi-Fi network without a Wi-Fi password,
using the hotspot web page or the touch screen.

To add a WPS-enabled Wi-Fi device from the touch screen:
1. To wake up the device, press the Power key.
2. Tap the Home ( ) button.
Telstra
WI-FI: TPPW4G_0D23
PWD: 83914893
3.4GB (43%) used
22 days left
Estimated data. Check My Account.
Telstra Wi-Fi 4GX Advanced III
on page 29.
100%
of 8.0 GB
Use Your Mobile Hotspot
22
Set the