Table of Contents
Advertisement
Using Your Jetpack for the First Time
The first time you use your Jetpack, do the following:
1.
Charge the battery.
For information about how to charge the battery, see
2.
Power on the Jetpack.
3.
Connect your computer or Wi-Fi-capable device to the Jetpack using Wi-Fi.
For information about how to connect using Wi-Fi, see
Settings
on page 17.
Connect to the Jetpack Using Wi-Fi
The default settings allow 15 Wi-Fi–capable devices (such as smartphones, laptops, tablets,
digital cameras, printers, gaming consoles, and digital picture frames) to connect to the
primary Wi-Fi network, one Wi-Fi–capable device to connect to the guest Wi-Fi network, and
one additional tethered device to connect to the Jetpack via USB.
The guest network is turned off on initial start-up. To use the guest network, you must turn it
on using the Wi-Fi option of the Settings menu.
To change the number of devices that can connect to either network, see
Number of Connected Devices
You can add a Wi-Fi device to your Wi-Fi network manually. If the device you are adding is
WPS enabled, you can use the WPS method to connect the device without using the Wi-Fi
password.
Connect Using a Wi-Fi Network Manager
You can connect to the Jetpack Wi-Fi network using the Wi-Fi network manager on your
computer or Wi-Fi device.
To connect to the Jetpack Wi-Fi network using a Wi-Fi network manager:
1.
Open the Wi-Fi network manager on your computer or Wi-Fi device.
2.
Find and select the Jetpack Wi-Fi network name (SSID).
Note:
To view your Jetpack's Wi-Fi name (SSID) and password on the
Jetpack display, open the Wi-Fi Name/Password menu
3.
When prompted, enter the Wi-Fi password.
The Jetpack's password is on the Jetpack's display.
The computer or Wi-Fi device connects to the Jetpack Wi-Fi network.
Verizon Jetpack® 4G LTE Mobile Hotspot - AC791L
on page 37.
Use Your Jetpack
20
Charge the Battery
on page 13.
Manage Your Jetpack and
Set the Maximum
.
Advertisement
Table of Contents
