Feature Codes - Avaya M7100N User Manual

1.4 Feature Codes

The phone can access a range of functions by pressing the phone's Feature key and dialing the required feature code.
· Speed Dial: Feature 0 <index>
Dial a stored number. Follow it with a 3-dight number system speed dial (000 to 999) or * and a 2-digit number
personal speed dial (00 to 99).
· Ring Again: Feature 2 (Set)/Feature #2 (Clear)
Set a ringback on the extension being called. When the target extension ends its current call,you are rung and
when you answer, a new call is made to the target.
· Conference: Feature 3
Turn the current call and any held call or calls into a conference call. The held call can be an existing conference to
which you want to add another call.
· Forward Unconditional On: Feature 4 <number> (On)/Feature #4 (Off)
Switch on and off immediate forwarding of calls to the number entered.
· Last Number Redial: Feature 5
Redial the last number dialed. This code can only be used when the phone is currently idle.
· Page: Feature 60 <number>
Make a page call to an extension or group. The target extension or group members must be free and must support
handsfree auto-answer in order to hear the page.
· Retrieve Messages: Feature 65 or Feature 981
Access your voicemail mailbox to collect messages.
· Dial Voice Call: Feature 66 <number>
Have a call automatically answered on speaker phone after 3 beeps. If the extension is not free when called, the
call is presented as a normal call.
· Transfer: Feature 70 <number>
Put your current call on hold and make an transfer enquiry call to another number. Pressing Feature 70 again to
completes the transfer.
·
Each of these feature codes above can be
a single button press.
Administration Feature Codes
The following feature codes are used to edit phone settings. Some functions may request a security code after the
feature code is entered. When this occurs, enter your
Auto Dial Button
·
This feature allows you to store a number against a programmable button. After entering the code, press the
button to be programmed and then enter the number that the button should dial.
Internal Autodial (User Button)
·
This feature allow you to create a user button that matches another user's extension number. The button can then
be used to call the other user.
Ringer Sound
· 66
Adjust the ringer sound type. When selected, the number keys 1 to 4 are used to select the required ringer. The
volume can also be adjusted using the volume controls.
Ring Volume : Feature *80
· 66
This feature code causes the phone's ringer to sound for a short period during which its volume can be adjusted
using the phone's volume controls.
M7100N Telephone User Guide
IP Office
assigned to a programmable button
: Feature *1
70
: Feature *2
70
: Feature *6
login code and press #.
52
Telephone Overview: Button Functions
. The feature can then be invoked using
71
- Issue 02c (13 March 2014)
Page 11