Avaya 1100 Series Installation Manual page 24

3. Phone Installation
Having configured the telephone system
1100/1200 Series phone installation. The method to use depends on the following:
· The type of phone: 1100 Series or 1200 Series.
· Whether the phone is new or already has firmware, for example an existing phone being redeployed from a BCM
system or another IP Office system.
· Whether the telephone system is being used for DHCP for the phones or whether static addressing is being used
instead.
Use the table below to identify the method to use. In addition, sets currently operating on a BCM system that is being
replaced by an IP Office system can be directly migrated from the BCM. See
Installation type
New Phone
Redeployment from BCM
Redeployment from SIP
Automatic Migration
1100/1200 Series Phone Installation
IP Office Release 9.0
to support 1100/1200 phones, there are a number of methods for actual
14
DHCP
1100 Series 1200 Series
Method 1 Method 2
27
Method 1 Method 1
27
Method 1 Method 1
27
Automatic Migration Method
Automatic BCM Migration
Static IP Addressing
1100 Series
Method 3
27 28
Method 3
27 28
Method 5
27 31
25
Issue 05a (17 January 2014)
.
25
1200 Series
Method 4
30
Method 3
28
Method 5
31
Page 24