Avaya 1100 Series Installation Manual page 16

5. The contents of the memory card are displayed.
6. For an IP500 memory card, all the firmware files are held in the top level folder. For an IP500 V2 system, use the
folder tree to navigate to System SD | SYSTEM | PRIMARY. For a Linux based systems use the folder tree to
navigate system | primary.
7. Files can be copied onto the card by using drag and drop or by selecting File | Upload File.
· The source files can be found on the IP Office Manager PC in C:\Program Files\Avaya\IP
Office\Manager\memory Cards\Common\system\primary.
Manually Copying Files
Files can be copied onto the memory card by placing it into a PC with a suitable memory card slot.
!
WARNING
·
A memory card should never be removed from a running system without first being shutdown.IP Office Manager
should be used to shutdown the memory card before it is removed from the system.
1. Using IP Office Manager, select File | Advanced | Memory Card Command | Shutdown.
2. The Select IP Office menu is displayed.
3. Select the telephone system and click OK.
4. Enter the name and password for the system. These are the same as used for configuring the system.
5. You are prompted to confirm which card you want to shutdown. Select System and click OK.
6. On the back of the control unit, check that the LED for the memory card slot is off before removing the memory
card.
7. Place the card into the PC's memory card slot and examine the contents.
8. For an IP500 memory card, all the firmware files are held in the top level folder. For an IP500 V2 system, use the
folder tree to navigate to System SD | SYSTEM | PRIMARY. The source files can be found on the IP Office
Manager PC in C:\Program Files\Avaya\IP Office\Manager\memory Cards\Common\system\primary.
9. When the card is reinserted into the system, card usage is automatically restarted.
1100/1200 Series Phone Installation
IP Office Release 9.0
Page 16
Issue 05a (17 January 2014)