IBM 6400 series Maintenance Manual page 397

Hide thumbs Also See for 6400 series:

Table of Contents

5. Loosen the two setscrews on the motor pulley and remove the pulley.

(See Figure 78.) Go to step 6.

Figure 78. Removing the Timing Belt Motor Pulley

6. Remove the shoulder screw, washers, and spacer that secures the

constant force spring to the vertical rail. (See Figure 79.)

Power Stacker

Left is shown.

Right is the same.

Figure 79. Releasing the Constant Force Spring

Chapters

Table of Contents