Constant Force Spring - IBM 6400 series Maintenance Manual

Hide thumbs Also See for 6400 series:

Table of Contents

Replacing the Constant Force Spring

1. Remove the stacker assembly from the printer. (See page 378.)

In the next step, do not over-tighten the tie wraps or string. Tighten the

tie wraps or string just enough to hold the elevator up.

2. Raise the elevator assembly to its highest position and secure it to the

vertical rails using tie wraps or string. (See Figure 74.)

Power Stacker

Figure 74. Securing the Elevator Assembly

Elevator Assembly

Chapters

Table of Contents