IBM 6400 series Maintenance Manual page 394

Hide thumbs Also See for 6400 series:

Table of Contents

The constant force spring is a high tension spring. To avoid pinching

your fingers, coil the spring slowly and carefully. Do not let the spring

twist or crimp.

3. Remove the shoulder screw, washers, and spacer from the constant

force spring and drum. Let the spring coil itself up until it reaches the

screw that secures it to the vertical rail. (See Figure 75.)

4. Firmly gripping the spring and drum, remove the screw securing the

spring to the vertical rail. (See Figure 75.)

Constant Force Spring

Shoulder Screw

Figure 75. Removing the Constant Force Spring

Power Stacker

Chapters

Table of Contents