Lenovo Yoga 500-14IBD Hardware Maintenance Manual page 74

Yoga 500-14IBD/Yoga 500-14IHW/Yoga 500-14ACL/Yoga 500-14ACZ/
Yoga 500-15IBD/Yoga 500-15IHW/Yoga 500-15ACL Hardware Maintenance Manual
Figure 13. Removal steps of sensor board and antenna assembly (continued)
Peel off the adhesive tape securing the antenna boards. Release the cables
from the cable guide, and then remove the antenna assembly and sensor
board cable in the direction shown by arrows 4.
When installing: Route the antenna cables along the cable guides and secure
the antenna boards with adhesive tape. As you route the cables, make sure
that they are not subjected to any tension. Tension could cause the cables to
be damaged by the cable guides, or a wire to be broken.
70