NEC VERSAPRO VG User Manual page 22

7
When the [Windows Recovery] screen is displayed, select [Start to restore
your computer], and press <Enter>.
Follow the steps on the screen for the procedure.
Next, continue to "Windows Setup" (p.22).
DVD Recovery
1
Turn the power on and immediately press <F2> key several times.
The BIOS setup utility will then be started.
2
When the BIOS setup utility is displayed, insert the "Recovery Disc 1" into
the optical drive.
3
Press the <F10> key.
4
Confirm that [Yes] is selected and then press <Enter>.
5
Turn on the power and immediately press <F2> key several times.
The BIOS setup utility will then be started.
6
From the [Boot Override] option, select the optical drive using <> or <>
key, and press <Enter>.
If the desired device is not listed on the [Boot Override] menu, press <F10> and check
to see that [Yes] is selected. Then, press <Enter>, restart the BIOS setup utility, and
select the desired device.
The [Boot Override] is contained in the [Exit] option.
7
When [Press any key to boot from CD or DVD...] is displayed, press
<Enter>.
8
When the [Windows Recovery] screen is displayed, select [Start to restore
your computer], and press <Enter>.
9
If a recovery caution message appears again, read the message carefully
and select [Next].
Follow the steps on the screen for the procedure.
Next, continue to "Windows Setup" (p.22).
22
Windows Setup
Perform Windows setup.
Windows Setup
Set up the Windows system by referring to "
When Windows setup has completed, turn the power OFF and then do settings to
your needs.
Reinstall the applications pre-installed at time of purchase.
Next, continue to "Re-set the settings you made after purchase".
Re-set the settings you made after purchase
The settings which you did after purchasing your computer is lost once recovery has
started. Do the settings again. If you want to use some peripherals, connect them
and do the settings again. Configure the system and network settings again.
Next, continue to "After Recovery".
After Recovery
The applications which you installed from Application Disc or by any other way can
not be recovered. Reinstall them if needed.
Depending on your usage environment, the drive letter or the path assigned before
recovery might be different. In that case, change the allocation.
Now, your computer has been recovered.
Windows Setup" (p.3).
3